Most current LED lights hava a CRI of 70, which is not suitable for high definition filming. Brightcast offers CRI levels of up to 95!

Variations in CRI and Color Temperature (CCT) can cause problems when filming with multiple light sources. Brightcast light's high CRI and accurate CCT avoids color rendition problems.

Two filter slots for softness, CCT and color adjustments. Drop-guards prevent filters from dropping when lights are upside down.
 

Dimming and other adjustments can be performed via:
 . Dial
 . Infra-red remote
 . DMX control
0-100% light regulation is possible for all panels. Color and angle can be adjusted in function-capable lights.
Multi-panel control via DMX. 

DMX control                                   Dial                       Remote

Energy Saving = Money Saving
Energy inefficient lights usually start going dim after 3-4 hours. A standard Sony battery can last up to 10 hours on a Brightcast light, staying on maximum brightness much longer.


Notes: 16” diagonal LED panels; single daylight angle 30 degree; same full capacity battery; constant temperature 25 degree; constant humidity 50%; maximum brightness;

Most LEDs will lose CT accuracy or brightness levels after some months.

After less than a year of use a poorly designed LED product can filcker, shift in color, look dim, offer uneven light, or continue to use power when turned off, among other problems.

Original Picture and Piture After 1 Year Operating.

Brightcast (upright) Vs. Normal (lower right).

High quality diodes and properly designed IC board ensures the logevity of Brightcast lights.

Luminosity Residue Rate Within 100,000 Hours

No beat effect /flicker-free dimming.

Constant current regulators guarantee stability
Changing brightness does not change CT
No flashing in camera screen

 Digital display shows brightness and CCT which are regulated separately. Adjusting brightness will not change the CCT. 
 

Most Brightcast panels come with DMX, allowing for unified control of several lights. Only 3 simple steps need to be taken to install a new DMX address.